7202LA35J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 22.2MHz |
| Access Time | 35 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7202LA35J Overview
The PLCC package contains FIFO memory chip.Mounting it in Surface Mount is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.32 terminations are contained in FIFO means.There are 32 pins on the operation pins.For its operation, 80mA is the maximum current required.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.In FIFOs , there is a self-contained gadget.The IC of the part is of the type OTHER FIFO .There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.There are a total of 32 pins on this board.Regular operation has a FIFO memory's maximum value of 22.2MHz .The component normally owns 5V power supplies.With the help of this FIFO memory, RETRANSMIT can also be generated.By using 2 circuitry, FIFO memory chip has enhanced flexibility.
7202LA35J Features
FIFOs category
Frequency at most
7202LA35J Applications
There are a lot of Integrated Device Technology (IDT) 7202LA35J FIFOs Memory applications.
- Look-up Tables
- Video
- Wireless
- GPS Offender Tracking
- Networking
- Computer Systems
- Data communications
- Portable Information Devices
- Alarm System
- HDD
