7202LA35TP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Data Bus Width | 9b |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
7202LA35TP Overview
PDIP is a package that contains FIFO memory chip.Through Hole is memory IC's recommended mounting method.With a supply voltage of 5V volts, high efficiency is possible.I found that it has 28 terminations in FIFO means.FIFO design has 28 operation pins.Its maximum operating current is 80mA .Set the supply voltage to 5V to ensure FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.A self-contained gadget is contained within FIFOs .A OTHER FIFO memory type IC is used in the part.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum voltage of 5.5V volts can be applied to FIFO memory.There are a total of 28 pins on this board.Normaly, the component is powered by 5V power supplies.The gadget can also generate a value of RETRANSMIT .There is 22.2MHz frequency set for the clock of the FIFO memory IC.
7202LA35TP Features
FIFOs category
Clock frequency of 22.2MHz
7202LA35TP Applications
There are a lot of Integrated Device Technology (IDT) 7202LA35TP FIFOs Memory applications.
- Event Recorder
- Multimedia
- HDD
- One assembly
- Computers
- SPI Bus Flash Memory Device
- Look-up Tables
- Computer Systems
- Data communications
- Smart Meter
