7203L12J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Max Supply Current | 120mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 2KX9 |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7203L12J8 Overview
PLCC is a package that contains FIFO memory chip.It is pointing in the direction of Surface Mount .Supply voltages of 5V are capable of achieving high efficiency.FIFO means contains 32 terminations.There are 32 pins for operation.In order to operate it, it requires 120mA volts of current.A 5V supply voltage will ensure FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.The gadget in FIFOs is self-contained.It has a OTHER FIFO memory type IC.FIFO may operate at very low supply voltages, such as 4.5V volts.The memory logic's maximum supply voltage is 5.5V volts.This FIFO memory IC is equipped with 32 pins in total.A component normally has 5V power supplies attached to it.This gadget can also be used to generate RETRANSMIT .The FIFO memory IC is controlled by a clock with a frequency of 50MHz .
7203L12J8 Features
FIFOs category
Clock frequency of 50MHz
7203L12J8 Applications
There are a lot of Integrated Device Technology (IDT) 7203L12J8 FIFOs Memory applications.
- HDD
- Wireless
- SPI Bus Flash Memory Device
- Computers
- Network bridges
- Telecommunication
- Networking
- Data communications
- Computer Systems
- Seismic Data Collection at Extreme Temperatures
