7203L15J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Data Bus Width | 9b |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
7203L15J Overview
The PLCC package contains FIFO memory chip.A Surface Mount mounting method is recommended.When the supply voltage is 5V , high efficiency is possible.32 terminations are contained in FIFO means.Operation pins are 32 .FIFO design requires 120mA amps of current to operate.A supply voltage of 5V is recommended for FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.Its maximum operating temperature of 70°C °C ensures stable operation.It is contained within FIFOs .There is a memory type OTHER FIFO in the IC of this part.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.The memory logic's maximum supply voltage is 5.5V volts.The FIFO memory IC has a total of 32 pins.It is normal for the component to own 5V power supplies.Using this gadget, RETRANSMIT can also be generated.There is 40MHz frequency set for the clock of the FIFO memory IC.
7203L15J Features
FIFOs category
Clock frequency of 40MHz
7203L15J Applications
There are a lot of Integrated Device Technology (IDT) 7203L15J FIFOs Memory applications.
- Buses
- Signal processing
- Video Processing
- Look-up Tables
- Data communications
- Character generators
- Thermal Management for DDR3 Memory Modules
- Computer Systems
- Cardiac Monitoring Device
- Down-Hole Energy Drilling
