7203L15P
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.6mm |
| Width | 15.24mm |
| Thickness | 3.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
7203L15P Overview
PDIP is a package that contains FIFO memory chip.Bulk case is used for packaging.A Through Hole mounting method is recommended.A supply voltage of 5V is capable of producing high efficiency.FIFO means contains 28 terminations.FIFO design has 28 operation pins.FIFO requires a minimum of 120mA current to operate.In order to maximize efficiency, the supply voltage should be set to 5V .Keeping the temperature at 0°C degrees Celsius ensures its reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.FIFOs contains this gadget in its entirety.In this part, the memory type is OTHER FIFO .FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.It has a total of 28 pins on it.Normally, 5V power supplies are owned by the component.Additionally, this FIFO memory can be used to generate RETRANSMIT .There is 40MHz frequency set for the clock of the FIFO memory IC.
7203L15P Features
FIFOs category
Clock frequency of 40MHz
7203L15P Applications
There are a lot of Integrated Device Technology (IDT) 7203L15P FIFOs Memory applications.
- One assembly
- Consumer Systems
- General Data Collection Applications at Extreme High-Temperatures
- Transistors
- Communications
- Application that requires re-writable nonvolatile parameter memory
- Test site
- IP Camera Buffer
- General Data Collection Applications at Low-Temperatures
- Look-up Tables
