7203L15TP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7203L15TP Overview
You will find FIFO memory chip in the PDIP package.It's packaged in the shape of a Bulk .It is recommended that memory IC be mounted in the Through Hole direction.An input voltage of 5V results in high efficiency.In FIFO means, there are 28 terminations.28 pins are the operation pins.FIFO design requires 120mA amps of current to operate.In order to maximize efficiency, the supply voltage should be set to 5V .It operates at 0°C degrees Celsius to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.FIFOs contains this gadget in its entirety.In this part, the memory type is OTHER FIFO .There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.There are a total of 28 pins on this board.Normaly, the component is powered by 5V power supplies.It is also possible to generate RETRANSMIT using this FIFO memory.FIFO memory ICs run at a frequency of 40MHz .
7203L15TP Features
FIFOs category
Clock frequency of 40MHz
7203L15TP Applications
There are a lot of Integrated Device Technology (IDT) 7203L15TP FIFOs Memory applications.
- Video
- TVs
- Event Recorder
- General Data Collection Applications at Low-Temperatures
- GPS Offender Tracking
- Test site
- Application that requires re-writable nonvolatile parameter memory
- High-speed disk
- Buses
- Computers
