7203L15TPGI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.012A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7203L15TPGI Overview
FIFO memory chip is contained in the PDIP package.It's packaged in the shape of a Bulk .Through Hole is memory IC's recommended mounting method.If the supply voltage is set to 5V , high efficiency can be achieved.I found that it has 28 terminations in FIFO means.In the case of the operation pins, they are 28 pins.In order to operate FIFO design, a maximum current of 120mA is required.In order to maximize efficiency, the supply voltage should be set to 5V .Keeping the temperature at -40°C degrees Celsius ensures its reliability.85°C °C is the memory logic's maximum operating temperature that allows stable operation.A self-contained gadget is contained within FIFOs .This part has a memory type of OTHER FIFO .FIFO may operate at a very low supply voltage, such as 4.5V V.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.There are a total of 28 pins on this FIFO memory IC.Normally, the component owns 5V power supplies.It is also possible to generate RETRANSMIT by using this FIFO memory.A clock on the FIFO memory IC runs at a frequency of 40MHz .
7203L15TPGI Features
FIFOs category
Clock frequency of 40MHz
7203L15TPGI Applications
There are a lot of Integrated Device Technology (IDT) 7203L15TPGI FIFOs Memory applications.
- Computer networks
- High-speed graphics pixel buffer
- Communications Systems
- IP Radio
- Address mapping
- Code converters
- HDD
- GPS Offender Tracking
- SPI Bus Flash Memory Device
- Video Processing
