7203L15TPI
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.012A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7203L15TPI Overview
PDIP is the package in which FIFO memory chip is contained.There is a case Bulk in which it is packaged.The recommended mounting method for this FIFO products is Through Hole .If the supply voltage is set to 5V , high efficiency can be achieved.FIFO means contains 28 terminations.As far as the operation pins are concerned, they are 28 pins.FIFO design requires a maximum current of 120mA to operate.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.It is designed to run at a minimum temperature of -40°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.In FIFOs , there is a self-contained gadget.The IC of the part is of the type OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V V.Approximately 28 pins are attached to it.It is normal for the component to own 5V power supplies.This gadget can also generate RETRANSMIT .In this FIFO memory IC, the clock runs at frequency 40MHz .
7203L15TPI Features
FIFOs category
Clock frequency of 40MHz
7203L15TPI Applications
There are a lot of Integrated Device Technology (IDT) 7203L15TPI FIFOs Memory applications.
- Fabrication Site
- Computer networks
- Video
- A/D output buffers
- Test Equipment
- Smart Meter
- IP Camera Buffer
- Cardiac Monitoring Device
- General Data Collection Applications at Extreme High-Temperatures
- Controlled baseline
