Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
LCC |
Number of Pins |
32 |
Packaging |
Tape & Reel |
Published |
2005 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
32 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-55°C |
Additional Feature |
RETRANSMIT |
Subcategory |
FIFOs |
Technology |
CMOS |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Pin Count |
32 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
MILITARY |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Element Configuration |
Dual |
Nominal Supply Current |
150mA |
Max Supply Current |
150mA |
Clock Frequency |
33.3MHz |
Access Time |
20 ns |
Organization |
2KX9 |
Density |
18 kb |
Standby Current-Max |
0.004A |
Screening Level |
MIL-STD-883 Class B |
Parallel/Serial |
PARALLEL |
Sync/Async |
Asynchronous |
Word Size |
9b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Unidirectional |
Retransmit Capability |
Yes |
FWFT Support |
No |
Output Enable |
NO |
Cycle Time |
30 ns |
Height Seated (Max) |
3.048mm |
Length |
11.4mm |
Width |
13.97mm |
Thickness |
1.78mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
7203L20LB8 Overview
FIFO memory chip is contained in the LCC package.This FIFO memory chip is packaged as a Tape & Reel .It is pointing in the direction of Surface Mount .When the supply voltage is 5V , high efficiency is possible.32 terminations are contained in FIFO means.There are 32 pins for operation.FIFO requires a minimum of 150mA current to operate.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.During operation, a minimum temperature of -55°C degrees Celsius should be maintained in order to ensure reliability.An operating temperature of 125°C °C is necessary for stable operation.The gadget is self-contained and can be found in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.The memory logic's maximum supply voltage is 5.5V volts.Approximately 32 pins are attached to it.In normal circumstances, the component has 5V power supplies.It is also possible to generate RETRANSMIT with the use of this FIFO memory.The FIFO memory IC runs at a frequency of 33.3MHz .
7203L20LB8 Features
FIFOs category
Clock frequency of 33.3MHz
7203L20LB8 Applications
There are a lot of Integrated Device Technology (IDT) 7203L20LB8 FIFOs Memory applications.
- Game Controller
- SPI Bus Flash Memory Devices
- PC peripheral
- Application that requires re-writable nonvolatile parameter memory
- Optical memories
- Consumer
- Multi-stage synchronizer
- Game Consoles
- Medical Monitoring Device
- Emulators