7203L25J
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
7203L25J Overview
The PLCC package contains FIFO memory chip.A Surface Mount mounting method is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.The number of terminations in FIFO means is 32 .There are 32 pins for operation.The maximum current required for its operation is 120mA .FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.This gadget is self-contained in?FIFOs .It has a type OTHER FIFO memory IC.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V V.This FIFO memory IC is equipped with 32 pins in total.The component normally owns 5V power supplies.It is also possible to generate RETRANSMIT using this FIFO memory.FIFO memory ICs run at a frequency of 28.5MHz .
7203L25J Features
FIFOs category
Clock frequency of 28.5MHz
7203L25J Applications
There are a lot of Integrated Device Technology (IDT) 7203L25J FIFOs Memory applications.
- Controlled baseline
- IP Radio
- Digital buffering
- Tape controllers
- One assembly
- SPD for DDR3 Memory Modules
- Emulators
- Analog-to-digital converters
- Queues for communication systems
- TVs
