7203L25P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Access Time | 25 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.6mm |
| Width | 15.24mm |
| Thickness | 3.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7203L25P Overview
FIFO memory chip is contained in the PDIP package.A Through Hole mounting method is recommended.A supply voltage of 5V is capable of producing high efficiency.FIFO means contains 28 terminations.28 pins are used for operation.The maximum current required for its operation is 120mA .A 5V supply voltage will ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained within FIFOs .It has a OTHER FIFO memory type IC.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.A maximum voltage of 5.5V volts can be applied to FIFO memory.The FIFO memory IC is equipped with a total of 28 pins.Components normally possess 5V power supplies.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.
7203L25P Features
FIFOs category
7203L25P Applications
There are a lot of Integrated Device Technology (IDT) 7203L25P FIFOs Memory applications.
- Notebook
- Transistors
- Consumer Systems
- Test Equipment
- Routers
- SPI Bus Flash Memory Devices
- Tape controllers
- Address mapping
- Consumer
- Data communications
