7203L25TP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 2.3kB |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Frequency (Max) | 28.5MHz |
| Access Time | 25 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 4.57mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7203L25TP Overview
PDIP is a package that contains FIFO memory chip.It is possible to store data and applications on the FIFO chips as they have 2.3kB in their memory.Mounting it in Through Hole is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.28 terminations are contained in FIFO means.There are 28 pins on the operation pins.Its maximum operating current is 120mA .When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.A self-contained gadget is contained in FIFOs .The IC of the part is OTHER FIFO memory type.FIFO may operate at a very low supply voltage, such as 4.5V V.The memory logic's maximum supply voltage is 5.5V volts.As a result, it contains a total of 28 pins.28.5MHz is the FIFO memory IC's maximum value for regular operation.Normally, the component owns 5V power supplies.Additionally, RETRANSMIT can be generated with this FIFO memory.Due to the use of 1 circuits, FIFO memory chip has an enhanced level of flexibility.
7203L25TP Features
2.3kB memory size
FIFOs category
Frequency at most
7203L25TP Applications
There are a lot of Integrated Device Technology (IDT) 7203L25TP FIFOs Memory applications.
- Address mapping
- High-speed disk
- Product traceability
- Firmware loaders
- Game Controller
- Application that requires re-writable nonvolatile parameter memory
- Routers
- Extended product-change notification
- Character generators
- Networking
