7203L30TDB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 25MHz |
| Access Time | 30 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.004A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 40 ns |
| Height Seated (Max) | 5.08mm |
| Length | 37.72mm |
| Width | 7.62mm |
| Thickness | 3.56mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7203L30TDB Overview
The CDIP package contains FIFO memory chip.This FIFO memory chip is packaged as a Bulk .Mounting it in Through Hole is recommended.When the supply voltage is 5V there is the possibility of high efficiency.FIFO consists of 28 terminations, which indicates that FIFO means is empty.There are 28 pins for operation.FIFO design requires 150mA amps of current to operate.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.The FIFO products must be run at a minimum temperature of -55°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 125°C degrees Celsius, stable operation can be achieved.FIFOs contains this gadget in its entirety.ICs of type OTHER FIFO are used in the FIFO memory chip.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V volts.This FIFO memory IC is equipped with 28 pins in total.Normally, the component owns 5V power supplies.With the help of this FIFO memory, RETRANSMIT can also be generated.This FIFO memory IC has a clock frequency of 25MHz .
7203L30TDB Features
FIFOs category
Clock frequency of 25MHz
7203L30TDB Applications
There are a lot of Integrated Device Technology (IDT) 7203L30TDB FIFOs Memory applications.
- General Data Collection Applications at Extreme High-Temperatures
- Test Equipment
- Measurement Equipment
- Portable Information Devices
- Notebook
- Analog-to-digital converters
- Switches
- Data
- Industrial Systems
- Event Recorder
