7203L35P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.6mm |
| Width | 15.24mm |
| Thickness | 3.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7203L35P Overview
You will find FIFO memory chip in the PDIP package.The recommended mounting method for this FIFO products is Through Hole .If the supply voltage is set to 5V , high efficiency can be achieved.The number of terminations in FIFO means is 28 .The operation pins are 28 pins.FIFO requires a minimum of 120mA current to operate.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.A self-contained gadget is contained within FIFOs .There is a memory type OTHER FIFO in the IC of this part.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V V.As a result, it contains a total of 28 pins.Normally, 5V power supplies are owned by the component.Additionally, RETRANSMIT can be generated with this FIFO memory.This FIFO memory IC operates at a frequency of 22.2MHz .
7203L35P Features
FIFOs category
Clock frequency of 22.2MHz
7203L35P Applications
There are a lot of Integrated Device Technology (IDT) 7203L35P FIFOs Memory applications.
- Switches
- Rate buffers
- Emulators
- High-speed disk
- Data-acquisition systems
- MP3 Interface for Automobile
- SPD for DDR3 Memory Modules
- Look-up Tables
- Measurement Equipment
- Buses
