7203L35TP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Data Bus Width | 9b |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7203L35TP Overview
You will find FIFO memory chip in the PDIP package.The package comes in a case of Bulk .Through Hole is recommended as the mounting method.If the supply voltage is set to 5V , high efficiency can be achieved.FIFO consists of 28 terminations, which indicates that FIFO means is empty.In the case of the operation pins, they are 28 pins.In order to operate FIFO design, a maximum current of 120mA is required.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.It is self-contained in FIFOs .In this part, the memory type is OTHER FIFO .FIFO may operate at very low supply voltages, such as 4.5V volts.The memory logic's maximum supply voltage is 5.5V volts.There are a total of 28 pins on this FIFO memory IC.Normaly, the component is powered by 5V power supplies.Using this gadget, RETRANSMIT can also be generated.A clock on the FIFO memory IC runs at a frequency of 22.2MHz .
7203L35TP Features
FIFOs category
Clock frequency of 22.2MHz
7203L35TP Applications
There are a lot of Integrated Device Technology (IDT) 7203L35TP FIFOs Memory applications.
- One assembly
- Computer Systems
- GPS Offender Tracking
- Data-acquisition systems
- Wireless
- Look-up Tables
- Network bridges
- Game Consoles
- Event Recorder
- General Data Collection Applications at Low-Temperatures
