7203L40LB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LCC |
| Number of Pins | 32 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 20MHz |
| Access Time | 40 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.004A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 50 ns |
| Height Seated (Max) | 3.048mm |
| Length | 11.4mm |
| Width | 13.97mm |
| Thickness | 1.78mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7203L40LB Overview
This package is included in LCC .The recommended mounting way is Surface Mount .High efficiency is possible with a supply voltage of 5V .FIFO means contains 32 terminations.As far as the operation pins are concerned, they are 32 pins.The maximum current required for its operation is 150mA .FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.It is designed to run at a minimum temperature of -55°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 125°C °C.In FIFOs , this gadget is self-contained.It has a OTHER FIFO memory type IC.FIFO may operate at a very low supply voltage, such as 4.5V V.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.It has a total of 32 pins on it.In normal circumstances, the component has 5V power supplies.Using this gadget, RETRANSMIT can also be generated.The FIFO memory IC's clock runs at a frequency of 20MHz .
7203L40LB Features
FIFOs category
Clock frequency of 20MHz
7203L40LB Applications
There are a lot of Integrated Device Technology (IDT) 7203L40LB FIFOs Memory applications.
- Telecommunication
- SPI Bus Flash Memory Devices
- Down-Hole Energy Drilling
- Tape controllers
- Extended product-change notification
- Cameras
- High-speed graphics pixel buffer
- Communications Systems
- Temporary storage elements
- Multimedia
