7203L40LB8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 20MHz |
| Access Time | 40 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.004A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 50 ns |
| Height Seated (Max) | 3.048mm |
| Length | 11.4mm |
| Width | 13.97mm |
| Thickness | 1.78mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7203L40LB8 Overview
You can find FIFO memory chip in the LCC package.In this case, it is packaged in case number Tape & Reel .Mounting it in Surface Mount is recommended.Supply voltages of 5V are capable of achieving high efficiency.FIFO consists of 32 terminations, which indicates that FIFO means is empty.32 pins are the operation pins.In order to operate FIFO design, a maximum current of 150mA is required.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at -55°C degrees Celsius at all times.The stable operation is enabled by the memory logic's maximum operating temperature of 125°C °C.The gadget in FIFOs is self-contained.A OTHER FIFO memory type IC is used in the part.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V volts.A total of 32 pins are present on the FIFO memory IC.It is normal for the component to own 5V power supplies.Using this gadget, RETRANSMIT can also be generated.A clock running at frequency 20MHz is used by the FIFO memory IC.
7203L40LB8 Features
FIFOs category
Clock frequency of 20MHz
7203L40LB8 Applications
There are a lot of Integrated Device Technology (IDT) 7203L40LB8 FIFOs Memory applications.
- Product traceability
- Event Recorder
- Networking
- Disk Controllers
- Smart Meter
- Consumer Systems
- Portable Information Devices
- Communications
- Telecommunication
- Tape controllers
