7203L50P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 15MHz |
| Access Time | 50 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 65 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.6mm |
| Width | 15.24mm |
| Thickness | 3.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7203L50P Overview
You can find FIFO memory chip in the PDIP package.The recommended mounting method for this FIFO products is Through Hole .An input voltage of 5V results in high efficiency.The number of terminations in FIFO means is 28 .28 pin is used for operation.For its operation, 120mA is the maximum current required.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.An operating temperature of 70°C °C is necessary for stable operation.A self-contained gadget is contained in FIFOs .It has a OTHER FIFO memory type IC.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.It has a total of 28 pins on it.Normally, the component owns 5V power supplies.It is also possible to generate RETRANSMIT with the use of this FIFO memory.The clock of the FIFO memory IC runs at 15MHz frequency.
7203L50P Features
FIFOs category
Clock frequency of 15MHz
7203L50P Applications
There are a lot of Integrated Device Technology (IDT) 7203L50P FIFOs Memory applications.
- TVs
- IP Radio
- Controlled baseline
- Optical memories
- A/D output buffers
- Thermal Management for DDR3 Memory Modules
- SPI Bus Flash Memory Device
- PC peripheral
- Extended product-change notification
- Programmable Logic Controller
