7203L50TP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 15MHz |
| Access Time | 50 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Programmable Flags Support | No |
| Output Enable | NO |
| Cycle Time | 65 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
7203L50TP Overview
You can find FIFO memory chip in package PDIP .A Through Hole mounting method is recommended.When the supply voltage is 5V , high efficiency is possible.FIFO means contains 28 terminations.The operation pins are 28 pins.FIFO requires a minimum of 120mA current to operate.In order to maximize efficiency, the supply voltage should be set to 5V .For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.It is contained within FIFOs .The IC of the part is OTHER FIFO memory type.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.A total of 28 pins are present on the FIFO memory IC.In normal circumstances, the component has 5V power supplies.It is also possible to generate RETRANSMIT by using this FIFO memory.A clock running at frequency 15MHz is used by the FIFO memory IC.
7203L50TP Features
FIFOs category
Clock frequency of 15MHz
7203L50TP Applications
There are a lot of Integrated Device Technology (IDT) 7203L50TP FIFOs Memory applications.
- Video time base correction
- Transistors
- Telecommunication
- Network switching/routing
- Optical memories
- One assembly
- Controlled baseline
- Firmware loaders
- Product traceability
- General Data Collection Applications at Extreme High-Temperatures
