7204L12J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7204L12J8 Overview
FIFO memory chip can be found in the PLCC package.This FIFO memory chip is packaged as a Tape & Reel .Memory IC's recommended mounted way is Surface Mount .An input voltage of 5V results in high efficiency.FIFO consists of 32 terminations, which indicates that FIFO means is empty.The operation pins are 32 pins.In order to operate FIFO design, a maximum current of 120mA is required.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.FIFOs contains this gadget in its entirety.A OTHER FIFO memory type IC is used in the part.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.Currently, it has 32 pins.In normal circumstances, the component has 5V power supplies.With the help of this FIFO memory, RETRANSMIT can also be generated.A clock on the FIFO memory IC runs at a frequency of 50MHz .
7204L12J8 Features
FIFOs category
Clock frequency of 50MHz
7204L12J8 Applications
There are a lot of Integrated Device Technology (IDT) 7204L12J8 FIFOs Memory applications.
- Extended product-change notification
- Data-acquisition systems
- Battery Charger
- General Data Collection Applications at Low-Temperatures
- TVs
- Laser Receiver System
- IP Camera Buffer
- Computer Systems
- Application that requires re-writable nonvolatile parameter memory
- Cardiac Monitoring Device
