7204L12P
| Parameters | |
|---|---|
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.6mm |
| Width | 15.24mm |
| Thickness | 3.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
7204L12P Overview
You will find FIFO memory chip in the PDIP package.Mounting it in Through Hole is recommended.When the supply voltage is 5V , high efficiency is possible.A total of 28 terminations can be found in FIFO means.28 pins are used for operation.In order for FIFO design to operate, a maximum current of 120mA is required.A 5V supply voltage will ensure FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.An operating temperature of 70°C °C is necessary for stable operation.A self-contained gadget is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Low supply voltages, such as 4.5V V, may be required for operation.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.This FIFO memory IC is equipped with 28 pins in total.In normal circumstances, the component has 5V power supplies.Additionally, this FIFO memory can be used to generate RETRANSMIT .The FIFO memory IC's clock runs at a frequency of 50MHz .
7204L12P Features
FIFOs category
Clock frequency of 50MHz
7204L12P Applications
There are a lot of Integrated Device Technology (IDT) 7204L12P FIFOs Memory applications.
- Wireless
- Extended product life cycle
- Game Consoles
- Network switching/routing
- Cardiac Monitoring Device
- Firmware loaders
- Portable Information Devices
- Consumer
- Buses
- IP Camera Buffer
