7204L15J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
7204L15J Overview
FIFO memory chip is contained in the PLCC package.Memory IC's recommended mounted way is Surface Mount .A supply voltage of 5V is capable of producing high efficiency.A total of 32 terminations can be found in FIFO means.These are the 32 pins for operation.For its operation, 120mA is the maximum current required.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.A self-contained gadget is contained in FIFOs .A OTHER FIFO memory type IC is used in the part.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V V.This FIFO memory IC is equipped with 32 pins in total.Normally, 5V power supplies are owned by the component.The gadget can also generate a value of RETRANSMIT .The FIFO memory IC's clock runs at a frequency of 40MHz .
7204L15J Features
FIFOs category
Clock frequency of 40MHz
7204L15J Applications
There are a lot of Integrated Device Technology (IDT) 7204L15J FIFOs Memory applications.
- Event Recorder
- Rate buffers
- Medical Monitoring Device
- Tape controllers
- Data-acquisition systems
- Networking
- Code converters
- SPI Bus Flash Memory Devices
- SPI Bus Flash Memory Device
- IP Radio
