7204L15JI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.012A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7204L15JI Overview
The PLCC package contains FIFO memory chip.A Surface Mount mounting method is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.As a result of this, FIFO means contains 32 terminations.In the case of the operation pins, they are 32 pins.The maximum current required for its operation is 120mA .FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.Keeping the temperature at -40°C degrees Celsius ensures its reliability.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained within FIFOs .The IC of the part is OTHER FIFO memory type.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.The FIFO memory IC has a total of 32 pins.The component normally owns 5V power supplies.It is also possible to generate RETRANSMIT with the use of this FIFO memory.The FIFO memory IC is controlled by a clock with a frequency of 40MHz .
7204L15JI Features
FIFOs category
Clock frequency of 40MHz
7204L15JI Applications
There are a lot of Integrated Device Technology (IDT) 7204L15JI FIFOs Memory applications.
- General Data Collection Applications at Low-Temperatures
- Smart Meter
- Routers
- Test site
- Data communications
- Cardiac Monitoring Device
- Data
- IP Camera Buffer
- Signal processing
- Measurement Equipment
