7204L15TP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Organization | 4KX9 |
| Density | 36 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7204L15TP Overview
The PDIP package contains FIFO memory chip.The package comes in a case of Bulk .The recommended mounting method for this FIFO products is Through Hole .If the supply voltage is set to 5V , high efficiency can be achieved.FIFO consists of 28 terminations, which indicates that FIFO means is empty.There are 28 pins on the operation pins.FIFO design requires a maximum current of 120mA to operate.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.It is self-contained in FIFOs .In this part, the memory type is OTHER FIFO .There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.Approximately 28 pins are attached to it.The memory logic's maximum value is 40MHz for regular operation.Normally, the component owns 5V power supplies.It is also possible to generate RETRANSMIT using this FIFO memory.FIFO memory chip offers enhanced flexibility due to its use of 2 circuits.
7204L15TP Features
FIFOs category
Frequency at most
7204L15TP Applications
There are a lot of Integrated Device Technology (IDT) 7204L15TP FIFOs Memory applications.
- Computer networks
- Network switching/routing
- Rate buffers
- SPI Bus Flash Memory Device
- Controlled baseline
- Alarm System
- Computer Systems
- Address mapping
- Digital buffering
- Network bridges
