7204L20LB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | CLCC |
| Number of Pins | 32 |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Max Supply Current | 150mA |
| Clock Frequency | 33.3MHz |
| Access Time | 20 ns |
| Data Bus Width | 9b |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.004A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Programmable Flags Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 3.048mm |
| Length | 11.4mm |
| Width | 13.97mm |
| Thickness | 1.78mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7204L20LB Overview
FIFO memory chip is contained in the CLCC package.Surface Mount is memory IC's recommended mounting method.A supply voltage of 5V allows for high efficiency.I found that it has 32 terminations in FIFO means.There are 32 pins on the operation pins.In order to operate it, it requires 150mA volts of current.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.At a minimum working temperature of -55°C degrees Celsius, FIFO is guaranteed to operate reliably.By operating at 125°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained within FIFOs .This part has a memory type of OTHER FIFO .FIFO may operate at very low supply voltages, such as 4.5V volts.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.There are a total of 32 pins on this board.In normal circumstances, the component has 5V power supplies.Additionally, this FIFO memory can be used to generate RETRANSMIT .A clock on the FIFO memory IC runs at a frequency of 33.3MHz .
7204L20LB Features
FIFOs category
Clock frequency of 33.3MHz
7204L20LB Applications
There are a lot of Integrated Device Technology (IDT) 7204L20LB FIFOs Memory applications.
- Look-up Tables
- Programmable Logic Controller
- Data communications
- Communications Systems
- Seismic Data Collection at Extreme Temperatures
- Switches
- Firmware loaders
- Analog-to-digital converters
- Computers
- TVs
