7204L25J
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 28.5MHz |
| Access Time | 25 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
7204L25J Overview
FIFO memory chip is contained in the PLCC package.The recommended mounting method for this FIFO products is Surface Mount .Supply voltages of 5V are capable of achieving high efficiency.A total of 32 terminations are contained within FIFO means.As far as the operation pins are concerned, they are 32 pins.FIFO design requires a maximum current of 120mA to operate.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained within FIFOs .The IC of the part is OTHER FIFO memory type.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V V.There are a total of 32 pins on this FIFO memory IC.It is normal for a component to be equipped with 5V power supplies.With the help of this FIFO memory, RETRANSMIT can also be generated.FIFO memory ICs run at a frequency of 28.5MHz .
7204L25J Features
FIFOs category
Clock frequency of 28.5MHz
7204L25J Applications
There are a lot of Integrated Device Technology (IDT) 7204L25J FIFOs Memory applications.
- Multimedia
- Portable Information Devices
- Disk Controllers
- Measurement Equipment
- SPI Bus Flash Memory Devices
- Character generators
- A/D output buffers
- Down-Hole Energy Drilling
- One assembly
- HDD
