7204L25JI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 4.5kB |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Frequency (Max) | 28.5MHz |
| Access Time | 25 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Organization | 4KX9 |
| Density | 36 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
7204L25JI Overview
You will find FIFO memory chip in the PLCC package.Apps and data can be stored in the 4.5kB memory of the FIFO chip.Surface Mount is recommended as the mounting method.A supply voltage of 5V is capable of producing high efficiency.FIFO means contains a total of 32 terminations.Operation pins are 32 .In order to operate it, it requires 120mA volts of current.For FIFO's maximum efficiency, the supply voltage should be set to 5V .During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.By operating at a temperature of 85°C °C, the FIFO products is capable of stable operation.It is self-contained in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Low supply voltages, such as 4.5V V, may be required for operation.FIFO memory can handle a maximum supply voltage of 5.5V V.Approximately 32 pins are attached to it.28.5MHz is the FIFO memory IC's maximum value for regular operation.Components normally possess 5V power supplies.This gadget can also be used to generate RETRANSMIT .FIFO memory chip offers enhanced flexibility due to its use of 2 circuits.
7204L25JI Features
4.5kB memory size
FIFOs category
Frequency at most
7204L25JI Applications
There are a lot of Integrated Device Technology (IDT) 7204L25JI FIFOs Memory applications.
- Video
- Measurement Equipment
- Disk Controllers
- Emulators
- Magnetic memories
- Code converters
- Consumer
- Laser Receiver System
- Portable Information Devices
- GPS Offender Tracking
