7204L25TP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Access Time | 25 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Height Seated (Max) | 4.57mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7204L25TP Overview
PDIP is a package that contains FIFO memory chip.Through Hole is recommended as the mounting method.When the supply voltage is 5V , high efficiency is possible.FIFO means contains 28 terminations.28 pins are used for operation.The maximum current required for its operation is 120mA .For FIFO's maximum efficiency, the supply voltage should be set to 5V .This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.It is self-contained in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.It has a total of 28 pins on it.A component normally has 5V power supplies attached to it.Additionally, RETRANSMIT can be generated with this FIFO memory.
7204L25TP Features
FIFOs category
7204L25TP Applications
There are a lot of Integrated Device Technology (IDT) 7204L25TP FIFOs Memory applications.
- High-speed graphics pixel buffer
- Consumer Systems
- Thermal Management for DDR3 Memory Modules
- Industrial Systems
- Smart Meter
- MP3 Interface for Automobile
- Queues for communication systems
- Telecommunication
- Test site
- Product traceability
