7204L30DB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 25MHz |
| Access Time | 30 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.004A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 40 ns |
| Height Seated (Max) | 5.08mm |
| Length | 37.2mm |
| Width | 15.24mm |
| Thickness | 1.65mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7204L30DB Overview
The CDIP package contains FIFO memory chip.It's packaged in the shape of a Bulk .It is pointing in the direction of Through Hole .An input voltage of 5V results in high efficiency.FIFO consists of 28 terminations, which indicates that FIFO means is empty.28 pin is used for operation.In order for FIFO design to operate, a maximum current of 150mA is required.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.At a minimum working temperature of -55°C degrees Celsius, FIFO is guaranteed to operate reliably.Keeping the operating temperature at 125°C °C allows the FIFO products to operate continuously.In FIFOs , this gadget is self-contained.This part has a memory type of OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.A maximum voltage of 5.5V volts can be applied to FIFO memory.There are a total of 28 pins on this FIFO memory IC.Normaly, the component is powered by 5V power supplies.The gadget can also generate a value of RETRANSMIT .FIFO memory ICs run at a frequency of 25MHz .
7204L30DB Features
FIFOs category
Clock frequency of 25MHz
7204L30DB Applications
There are a lot of Integrated Device Technology (IDT) 7204L30DB FIFOs Memory applications.
- Emulators
- Data-acquisition systems
- GPS Offender Tracking
- Signal processing
- SPD for DDR3 Memory Modules
- Multimedia
- HDD
- PC peripheral
- SPI Bus Flash Memory Device
- Portable Information Devices
