7204L30TDB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 25MHz |
| Access Time | 30 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.004A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 40 ns |
| Height Seated (Max) | 5.08mm |
| Length | 37.72mm |
| Width | 7.62mm |
| Thickness | 3.56mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7204L30TDB Overview
FIFO memory chip is included in the CDIP package.The package comes in a case of Bulk .The recommended mounting way is Through Hole .It is possible to achieve high efficiency with a supply voltage of 5V .A total of 28 terminations can be found in FIFO means.FIFO design has 28 operation pins.In order to operate it, it requires 150mA volts of current.A 5V supply voltage will ensure FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of -55°C degrees Celsius.By operating at a temperature of 125°C °C, the FIFO products is capable of stable operation.There is a self-contained gadget within FIFOs .The IC of the part is of the type OTHER FIFO .In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.It consists of a total of 28 pins.Normally, 5V power supplies are owned by the component.Using this gadget, RETRANSMIT can also be generated.This FIFO memory IC has a clock frequency of 25MHz .
7204L30TDB Features
FIFOs category
Clock frequency of 25MHz
7204L30TDB Applications
There are a lot of Integrated Device Technology (IDT) 7204L30TDB FIFOs Memory applications.
- Communications Systems
- Product traceability
- High-speed disk
- TVs
- SPI Bus Flash Memory Devices
- PC peripheral
- Test site
- Code converters
- Computer networks
- Battery Charger
