7204L35J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Organization | 4KX9 |
| Output Characteristics | 3-STATE |
| Density | 36 kb |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7204L35J8 Overview
The PLCC package contains FIFO memory chip.It is recommended that memory IC be mounted in the Surface Mount direction.An input voltage of 5V results in high efficiency.A total of 32 terminations can be found in FIFO means.32 pin is used for operation.FIFO design requires 120mA amps of current to operate.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.A self-contained gadget is contained in FIFOs .This part has a memory type of OTHER FIFO .FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.It consists of a total of 32 pins.A component normally has 5V power supplies attached to it.It is also possible to generate RETRANSMIT by using this FIFO memory.The FIFO memory IC is controlled by a clock with a frequency of 22.2MHz .
7204L35J8 Features
FIFOs category
Clock frequency of 22.2MHz
7204L35J8 Applications
There are a lot of Integrated Device Technology (IDT) 7204L35J8 FIFOs Memory applications.
- Battery Charger
- One assembly
- Communications Systems
- Industrial Systems
- Temporary storage elements
- Digital buffering
- Portable Information Devices
- Computer Systems
- Product traceability
- Network bridges
