7204L35P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.6mm |
| Width | 15.24mm |
| Thickness | 3.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7204L35P Overview
You can find FIFO memory chip in package PDIP .It is recommended that memory IC be mounted in the Through Hole direction.Supply voltages of 5V are capable of achieving high efficiency.As a result of this, FIFO means contains 28 terminations.Operation pins are 28 .FIFO requires a minimum of 120mA current to operate.A voltage of 5V should be used for FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.The gadget in FIFOs is self-contained.There is a memory type OTHER FIFO in the IC of this part.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.Currently, it has 28 pins.Normally, 5V power supplies are owned by the component.Additionally, RETRANSMIT can be generated with this FIFO memory.This FIFO memory IC operates at a frequency of 22.2MHz .
7204L35P Features
FIFOs category
Clock frequency of 22.2MHz
7204L35P Applications
There are a lot of Integrated Device Technology (IDT) 7204L35P FIFOs Memory applications.
- Telecommunication
- Down-Hole Energy Drilling
- A/D output buffers
- Transistors
- Industrial Systems
- Queues for communication systems
- Cardiac Monitoring Device
- Digital buffering
- Networking
- Optical memories
