7204L50J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 15MHz |
| Access Time | 50 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Programmable Flags Support | No |
| Output Enable | NO |
| Cycle Time | 65 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7204L50J Overview
This package is included in PLCC .Surface Mount is recommended as the mounting method.Supply voltages of 5V are capable of achieving high efficiency.32 terminations are contained in FIFO means.There are 32 pins on the operation pins.The maximum current required for its operation is 120mA .A voltage of 5V should be used for FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.This gadget is self-contained in?FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum voltage of 5.5V volts can be applied to FIFO memory.Currently, it has 32 pins.A component normally has 5V power supplies attached to it.Using this gadget, RETRANSMIT can also be generated.The FIFO memory IC is controlled by a clock with a frequency of 15MHz .
7204L50J Features
FIFOs category
Clock frequency of 15MHz
7204L50J Applications
There are a lot of Integrated Device Technology (IDT) 7204L50J FIFOs Memory applications.
- General Data Collection Applications at Low-Temperatures
- Fabrication Site
- Test site
- Down-Hole Energy Drilling
- IP Radio
- PC peripheral
- Multi-stage synchronizer
- Tape controllers
- Routers
- Laser Receiver System
