7204L50TP
| Parameters | |
|---|---|
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 15MHz |
| Access Time | 50 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.002A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 65 ns |
7204L50TP Overview
The PDIP package contains FIFO memory chip.Memory IC's recommended mounted way is Through Hole .It is possible to achieve high efficiency with a supply voltage of 5V .28 terminations are contained in FIFO means.28 pin is used for operation.FIFO design requires 120mA amps of current to operate.A 5V supply voltage will ensure FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.The gadget in FIFOs is self-contained.There is a memory type OTHER FIFO in the IC of this part.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.A maximum voltage of 5.5V volts can be applied to FIFO memory.There are a total of 28 pins on this board.Components normally possess 5V power supplies.It is also possible to generate RETRANSMIT by using this FIFO memory.This FIFO memory IC has a clock frequency of 15MHz .
7204L50TP Features
FIFOs category
Clock frequency of 15MHz
7204L50TP Applications
There are a lot of Integrated Device Technology (IDT) 7204L50TP FIFOs Memory applications.
- Thermal Management for DDR3 Memory Modules
- Notebook
- Switches
- General Data Collection Applications at Extreme High-Temperatures
- Controlled baseline
- Smart Meter
- Telecommunication
- Test Equipment
- Video Processing
- Tape controllers
