7205L12J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.012A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7205L12J Overview
PLCC is the package in which FIFO memory chip is contained.The recommended mounting way is Surface Mount .A supply voltage of 5V is capable of producing high efficiency.I found that it has 32 terminations in FIFO means.In the case of the operation pins, they are 32 pins.The maximum current required for its operation is 120mA .In order to maximize efficiency, the supply voltage should be set to 5V .For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.The gadget is self-contained and can be found in FIFOs .It has a type OTHER FIFO memory IC.FIFO may operate at very low supply voltages, such as 4.5V volts.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.The FIFO memory IC is equipped with a total of 32 pins.Components normally possess 5V power supplies.This gadget can also generate RETRANSMIT .FIFO memory ICs run at a frequency of 50MHz .
7205L12J Features
FIFOs category
Clock frequency of 50MHz
7205L12J Applications
There are a lot of Integrated Device Technology (IDT) 7205L12J FIFOs Memory applications.
- IP Radio
- Extended product-change notification
- IP Camera Buffer
- Smart Meter
- Analog-to-digital converters
- Queues for communication systems
- Computer Systems
- Data
- Industrial Systems
- Temporary storage elements
