7205L12P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.012A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.6mm |
| Width | 15.24mm |
| Thickness | 3.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7205L12P Overview
You will find FIFO memory chip in the PDIP package.Mounting it in the Through Hole way is recommended.It is possible to achieve high efficiency with a supply voltage of 5V .In FIFO means, there are 28 terminations.28 pins are the operation pins.For its operation, 120mA is the maximum current required.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.The gadget is self-contained and can be found in FIFOs .The IC of the part is OTHER FIFO memory type.FIFO may operate at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V V.It has a total of 28 pins on it.A component normally has 5V power supplies attached to it.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.This FIFO memory IC has a clock frequency of 50MHz .
7205L12P Features
FIFOs category
Clock frequency of 50MHz
7205L12P Applications
There are a lot of Integrated Device Technology (IDT) 7205L12P FIFOs Memory applications.
- Multimedia
- Switches
- Wireless
- Extended product-change notification
- Computers
- Cardiac Monitoring Device
- Event Recorder
- Battery Charger
- Desktop Computers
- Data-acquisition systems
