7205L12TP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.012A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7205L12TP Overview
PDIP is the package in which FIFO memory chip is contained.Mounting it in Through Hole is recommended.When the supply voltage is 5V , high efficiency is possible.The number of terminations in FIFO means is 28 .There are 28 pins on the operation pins.In order for FIFO design to operate, a maximum current of 120mA is required.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.It is contained within FIFOs .In this part, the memory type is OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.It consists of a total of 28 pins.It is normal for the component to own 5V power supplies.It is also possible to generate RETRANSMIT using this FIFO memory.This FIFO memory IC operates at a frequency of 50MHz .
7205L12TP Features
FIFOs category
Clock frequency of 50MHz
7205L12TP Applications
There are a lot of Integrated Device Technology (IDT) 7205L12TP FIFOs Memory applications.
- Optical memories
- Switches
- Signal processing
- Notebook
- Networking
- Wireless
- Routers
- Microprogramming
- Telecommunication
- Product traceability
