7205L12TPG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.012A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
7205L12TPG Overview
The PDIP package contains FIFO memory chip.Mounting it in Through Hole is recommended.When the supply voltage is 5V , high efficiency is possible.In FIFO means, there are 28 terminations.As far as the operation pins are concerned, they are 28 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 120mA .A supply voltage of 5V is recommended for FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.FIFOs contains this gadget in its entirety.This part has a memory type of OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.An input voltage of 5.5V V is the maximum that FIFO memory can handle.This FIFO memory IC is equipped with 28 pins in total.Normally, the component owns 5V power supplies.It is also possible to generate RETRANSMIT by using this FIFO memory.This FIFO memory IC has a clock frequency of 50MHz .
7205L12TPG Features
FIFOs category
Clock frequency of 50MHz
7205L12TPG Applications
There are a lot of Integrated Device Technology (IDT) 7205L12TPG FIFOs Memory applications.
- Computer networks
- Industrial Systems
- Disk Controllers
- Fabrication Site
- Laser Receiver System
- Queues for communication systems
- Emulators
- Event Recorder
- Data
- Signal processing
