7205L15J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Data Bus Width | 9b |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Programmable Flags Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7205L15J Overview
You can find FIFO memory chip in the PLCC package.Mounting it Surface Mount is recommended.Supply voltages of 5V are capable of achieving high efficiency.FIFO means contains a total of 32 terminations.Operation pins are 32 .In order to operate it, it requires 120mA volts of current.For FIFO's maximum efficiency, the supply voltage should be set to 5V .The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.This gadget is self-contained in?FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.A maximum voltage of 5.5V volts can be applied to FIFO memory.It has a total of 32 pins on it.Normally, the component owns 5V power supplies.The gadget can also generate a value of RETRANSMIT .In this FIFO memory IC, the clock runs at frequency 40MHz .
7205L15J Features
FIFOs category
Clock frequency of 40MHz
7205L15J Applications
There are a lot of Integrated Device Technology (IDT) 7205L15J FIFOs Memory applications.
- Video time base correction
- A/D output buffers
- Signal processing
- SPI Bus Flash Memory Devices
- Event Recorder
- Laser Receiver System
- Computers
- Consumer
- Temporary storage elements
- High-speed graphics pixel buffer
