7205L15J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Max Supply Current | 120mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 8KX9 |
| Standby Current-Max | 0.008A |
| Memory Density | 73728 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7205L15J8 Overview
This package is included in PLCC .Memory IC's recommended mounted way is Surface Mount .High efficiency is possible with a supply voltage of 5V .FIFO means contains a total of 32 terminations.32 pins are the operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 120mA .In order to maximize efficiency, the supply voltage should be set to 5V .For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.The gadget is self-contained and can be found in FIFOs .It has a OTHER FIFO memory type IC.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.A total of 32 pins are present on the FIFO memory IC.Normally, the component owns 5V power supplies.With the help of this FIFO memory, RETRANSMIT can also be generated.There is 40MHz frequency set for the clock of the FIFO memory IC.
7205L15J8 Features
FIFOs category
Clock frequency of 40MHz
7205L15J8 Applications
There are a lot of Integrated Device Technology (IDT) 7205L15J8 FIFOs Memory applications.
- Event Recorder
- Multimedia
- Application that requires re-writable nonvolatile parameter memory
- One assembly
- HDD
- IP Radio
- Alarm System
- Multi-stage synchronizer
- Character generators
- Down-Hole Energy Drilling
