7205L15JGI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Max Supply Current | 120mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Data Bus Width | 9b |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.012A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Programmable Flags Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7205L15JGI8 Overview
You can find FIFO memory chip in package PLCC .Surface Mount is memory IC's recommended mounting method.If the supply voltage is set to 5V , high efficiency can be achieved.In FIFO means, there are 32 terminations.The operation pins are 32 pins.FIFO design requires a maximum current of 120mA to operate.In order to maximize efficiency, the supply voltage should be set to 5V .During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.The memory logic's maximum operating temperature is 85°C °C, which allows for stable operation.A self-contained gadget is contained in FIFOs .The IC of the part is of the type OTHER FIFO .It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.This FIFO memory IC is equipped with 32 pins in total.Normally, the component owns 5V power supplies.A clock on the FIFO memory IC runs at a frequency of 40MHz .
7205L15JGI8 Features
FIFOs category
Clock frequency of 40MHz
7205L15JGI8 Applications
There are a lot of Integrated Device Technology (IDT) 7205L15JGI8 FIFOs Memory applications.
- Network switching/routing
- Rate buffers
- Multimedia
- Communications Systems
- Computer networks
- GPS Offender Tracking
- Analog-to-digital converters
- Optical memories
- SPI Bus Flash Memory Devices
- Look-up Tables
