Parameters |
Contact Plating |
Lead, Tin |
Mount |
Through Hole |
Package / Case |
PDIP |
Number of Pins |
28 |
Weight |
4.190003g |
Published |
2009 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
28 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Additional Feature |
RETRANSMIT |
HTS Code |
8542.32.00.71 |
Subcategory |
FIFOs |
Technology |
CMOS |
Peak Reflow Temperature (Cel) |
245 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Pin Count |
28 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Element Configuration |
Dual |
Nominal Supply Current |
120mA |
Max Supply Current |
120mA |
Clock Frequency |
40MHz |
Access Time |
15 ns |
Organization |
8KX9 |
Density |
72 kb |
Standby Current-Max |
0.008A |
Parallel/Serial |
PARALLEL |
Sync/Async |
Asynchronous |
Word Size |
9b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Unidirectional |
Retransmit Capability |
Yes |
FWFT Support |
No |
Output Enable |
NO |
Cycle Time |
25 ns |
Height Seated (Max) |
4.572mm |
Length |
34.3mm |
Width |
7.62mm |
Thickness |
3.3mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
7205L15TP Overview
FIFO memory chip is contained in the PDIP package.The recommended mounting method for this FIFO products is Through Hole .An input voltage of 5V results in high efficiency.A total of 28 terminations are contained within FIFO means.28 pins are the operation pins.In order to operate FIFO design, a maximum current of 120mA is required.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.This gadget is self-contained in?FIFOs .It has a type OTHER FIFO memory IC.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.The memory logic's maximum supply voltage is 5.5V volts.There are a total of 28 pins on this FIFO memory IC.Normally, the component owns 5V power supplies.It is also possible to generate RETRANSMIT by using this FIFO memory.FIFO memory ICs run at a frequency of 40MHz .
7205L15TP Features
FIFOs category
Clock frequency of 40MHz
7205L15TP Applications
There are a lot of Integrated Device Technology (IDT) 7205L15TP FIFOs Memory applications.
- Multi-stage synchronizer
- PC peripheral
- Network switching/routing
- Code converters
- Disk Controllers
- Portable Information Devices
- Routers
- Medical Monitoring Device
- Multimedia
- Battery Charger