7205L20P
| Parameters | |
|---|---|
| Density | 72 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 4.699mm |
| Length | 36.6mm |
| Width | 15.24mm |
| Thickness | 3.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 33.3MHz |
| Access Time | 20 ns |
| Organization | 8KX9 |
7205L20P Overview
The PDIP package contains FIFO memory chip.This FIFO memory chip is packaged as a Bulk .It is pointing in the direction of Through Hole .If the supply voltage is set to 5V , high efficiency can be achieved.28 terminations are contained in FIFO means.There are 28 pins for operation.FIFO design requires 120mA amps of current to operate.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.A self-contained gadget is contained in FIFOs .A OTHER FIFO memory type IC is used in the part.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.As a result, it contains a total of 28 pins.Normaly, the component is powered by 5V power supplies.Additionally, RETRANSMIT can be generated with this FIFO memory.This FIFO memory IC operates at a frequency of 33.3MHz .
7205L20P Features
FIFOs category
Clock frequency of 33.3MHz
7205L20P Applications
There are a lot of Integrated Device Technology (IDT) 7205L20P FIFOs Memory applications.
- Video Processing
- Data communications
- Network switching/routing
- Game Consoles
- Look-up Tables
- Laser Receiver System
- Wireless
- Multimedia
- Fabrication Site
- Cardiac Monitoring Device
