7205L20TDB
| Parameters | |
|---|---|
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Max Supply Current | 150mA |
| Clock Frequency | 33.3MHz |
| Access Time | 20 ns |
| Organization | 8KX9 |
| Standby Current-Max | 0.012A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 5.08mm |
| Length | 37.72mm |
| Width | 7.62mm |
| Thickness | 3.56mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
7205L20TDB Overview
FIFO memory chip is contained in the CDIP package.This FIFO memory chip is packaged as a Bulk .Through Hole is recommended as the mounting method.When the supply voltage is 5V there is the possibility of high efficiency.As a result of this, FIFO means contains 28 terminations.These are the 28 pins for operation.In order for FIFO design to operate, a maximum current of 150mA is required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of -55°C degrees Celsius.The memory logic's maximum operating temperature is 125°C °C, which allows for stable operation.In FIFOs , there is a self-contained gadget.ICs of type OTHER FIFO are used in the FIFO memory chip.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.It has a total of 28 pins on it.A component normally has 5V power supplies attached to it.The gadget can also generate a value of RETRANSMIT .This FIFO memory IC has a clock frequency of 33.3MHz .
7205L20TDB Features
FIFOs category
Clock frequency of 33.3MHz
7205L20TDB Applications
There are a lot of Integrated Device Technology (IDT) 7205L20TDB FIFOs Memory applications.
- High-speed disk
- MP3 Interface for Automobile
- Portable Information Devices
- IP Radio
- Computers
- Cardiac Monitoring Device
- Consumer
- TVs
- Extended product life cycle
- Computer Systems
