7205L20TP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 33.3MHz |
| Access Time | 20 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 30 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7205L20TP Overview
You can find FIFO memory chip in the PDIP package.It's packaged in the shape of a Bulk .Mounting it Through Hole is recommended.When the supply voltage is 5V there is the possibility of high efficiency.In FIFO means, there are 28 terminations.There are 28 pins for operation.FIFO requires a minimum of 120mA current to operate.In order to maximize efficiency, the supply voltage should be set to 5V .Keeping the temperature at 0°C degrees Celsius ensures its reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.FIFOs contains this gadget in its entirety.The IC of the part is OTHER FIFO memory type.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.The FIFO memory IC is equipped with a total of 28 pins.Normaly, the component is powered by 5V power supplies.It is also possible to generate RETRANSMIT with the use of this FIFO memory.The FIFO memory IC is controlled by a clock with a frequency of 33.3MHz .
7205L20TP Features
FIFOs category
Clock frequency of 33.3MHz
7205L20TP Applications
There are a lot of Integrated Device Technology (IDT) 7205L20TP FIFOs Memory applications.
- Video Processing
- IP Camera Buffer
- Network switching/routing
- Magnetic memories
- Extended product-change notification
- Networking
- High-speed disk
- Battery Charger
- Test Equipment
- Buses
