7205L25TPI
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 9kB |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Frequency (Max) | 28.5MHz |
| Access Time | 25 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | NO |
| Cycle Time | 35 ns |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7205L25TPI Overview
The PDIP package contains FIFO memory chip.It comes in a Bulk package.A memory of 9kB is available for storing applications and data on this FIFO chip.Through Hole is recommended as the mounting method.Supply voltages of 5V are capable of achieving high efficiency.28 terminations are contained in FIFO means.28 pins are used for operation.FIFO requires a minimum of 120mA current to operate.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.In order to ensure reliability, FIFO is maintained at -40°C degrees Celsius at all times.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.FIFOs contains this gadget in its entirety.The IC of the part is OTHER FIFO memory type.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.The FIFO memory IC is equipped with a total of 28 pins.There is 28.5MHz FIFO memory IC's maximum value for regular operation.In normal circumstances, the component has 5V power supplies.This gadget can also be used to generate RETRANSMIT .Using 2 circuits allows for enhanced flexibility.
7205L25TPI Features
9kB memory size
FIFOs category
Frequency at most
7205L25TPI Applications
There are a lot of Integrated Device Technology (IDT) 7205L25TPI FIFOs Memory applications.
- Consumer Systems
- Programmable Logic Controller
- IP Camera Buffer
- MP3 Interface for Automobile
- Notebook
- Switches
- Routers
- SPD for DDR3 Memory Modules
- One assembly
- Test site
