7205L30DB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 25MHz |
| Access Time | 30 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.012A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 40 ns |
| Height Seated (Max) | 5.08mm |
| Length | 37.2mm |
| Width | 15.24mm |
| Thickness | 1.65mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7205L30DB Overview
The CDIP package contains FIFO memory chip.The package comes in a case of Bulk .Mounting it Through Hole is recommended.High efficiency is possible with a supply voltage of 5V .I found that it has 28 terminations in FIFO means.As far as the operation pins are concerned, they are 28 pins.Its maximum operating current is 150mA .FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.In order to ensure reliability, FIFO is maintained at -55°C degrees Celsius at all times.The stable operation is enabled by the memory logic's maximum operating temperature of 125°C °C.In FIFOs , there is a self-contained gadget.The IC of the part is OTHER FIFO memory type.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V V.There are a total of 28 pins on this board.It is normal for the component to own 5V power supplies.It is also possible to generate RETRANSMIT using this FIFO memory.The FIFO memory IC's clock runs at a frequency of 25MHz .
7205L30DB Features
FIFOs category
Clock frequency of 25MHz
7205L30DB Applications
There are a lot of Integrated Device Technology (IDT) 7205L30DB FIFOs Memory applications.
- Video
- Transistors
- Network switching/routing
- Digital buffering
- Address mapping
- Wireless
- Code converters
- Switches
- Queues for communication systems
- HDD
