7205L30LB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | CLCC |
| Number of Pins | 32 |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Max Supply Current | 150mA |
| Clock Frequency | 25MHz |
| Access Time | 30 ns |
| Organization | 8KX9 |
| Standby Current-Max | 0.012A |
| Memory Density | 73728 bit |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 40 ns |
| Height Seated (Max) | 3.048mm |
| Length | 11.4mm |
| Width | 13.97mm |
| Thickness | 1.78mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7205L30LB Overview
This package is included in CLCC .The recommended mounting method for this FIFO products is Surface Mount .When the supply voltage is 5V , high efficiency is possible.The number of terminations in FIFO means is 32 .FIFO design has 32 operation pins.FIFO design requires a maximum current of 150mA to operate.In order to maximize efficiency, the supply voltage should be set to 5V .FIFO operates at a minimum temperature of -55°C degrees Celsius to ensure reliabilFIFOy.Keeping the operating temperature at 125°C °C allows the FIFO products to operate continuously.It is self-contained in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.Approximately 32 pins are attached to it.Normaly, the component is powered by 5V power supplies.Using this gadget, RETRANSMIT can also be generated.In this FIFO memory IC, the clock runs at frequency 25MHz .
7205L30LB Features
FIFOs category
Clock frequency of 25MHz
7205L30LB Applications
There are a lot of Integrated Device Technology (IDT) 7205L30LB FIFOs Memory applications.
- GPS Offender Tracking
- HDD
- Rate buffers
- Disk Controllers
- High-speed graphics pixel buffer
- SPI Bus Flash Memory Devices
- Buses
- Notebook
- Video time base correction
- Signal processing
