7205L30TDB
| Parameters | |
|---|---|
| Height Seated (Max) | 5.08mm |
| Length | 37.72mm |
| Width | 7.62mm |
| Thickness | 3.56mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 25MHz |
| Access Time | 30 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.012A |
| Screening Level | MIL-STD-883 Class B |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 40 ns |
7205L30TDB Overview
You can find FIFO memory chip in the CDIP package.In this case, it is packaged in case number Bulk .Through Hole is memory IC's recommended mounting method.A supply voltage of 5V allows for high efficiency.I found that it has 28 terminations in FIFO means.28 pin is used for operation.There is a maximum current requirement of 150mA for its operation.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of -55°C degrees Celsius.An operating temperature of 125°C °C is necessary for stable operation.FIFOs contains this gadget in its entirety.It has a type OTHER FIFO memory IC.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.There are a total of 28 pins on this FIFO memory IC.Components normally possess 5V power supplies.This gadget can also be used to generate RETRANSMIT .The FIFO memory IC's clock runs at a frequency of 25MHz .
7205L30TDB Features
FIFOs category
Clock frequency of 25MHz
7205L30TDB Applications
There are a lot of Integrated Device Technology (IDT) 7205L30TDB FIFOs Memory applications.
- PC peripheral
- Game Controller
- Measurement Equipment
- Video
- Controlled baseline
- Computer networks
- Consumer
- Medical Monitoring Device
- Video time base correction
- General Data Collection Applications at Extreme High-Temperatures
