7205L35J
| Parameters | |
|---|---|
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 45 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 120mA |
| Max Supply Current | 120mA |
| Clock Frequency | 22.2MHz |
| Access Time | 35 ns |
| Organization | 8KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.008A |
| Parallel/Serial | PARALLEL |
7205L35J Overview
This package is included in PLCC .The recommended mounting way is Surface Mount .A supply voltage of 5V is capable of producing high efficiency.A total of 32 terminations can be found in FIFO means.As far as the operation pins are concerned, they are 32 pins.In order for FIFO design to operate, a maximum current of 120mA is required.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.The gadget is self-contained and can be found in FIFOs .The IC of the part is of the type OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.Approximately 32 pins are attached to it.The component normally owns 5V power supplies.This gadget can also be used to generate RETRANSMIT .The FIFO memory IC is controlled by a clock with a frequency of 22.2MHz .
7205L35J Features
FIFOs category
Clock frequency of 22.2MHz
7205L35J Applications
There are a lot of Integrated Device Technology (IDT) 7205L35J FIFOs Memory applications.
- Analog-to-digital converters
- Seismic Data Collection at Extreme Temperatures
- A/D output buffers
- Industrial Systems
- Down-Hole Energy Drilling
- Controlled baseline
- Fabrication Site
- TVs
- Application that requires re-writable nonvolatile parameter memory
- One assembly
